Excellent heat resistance
Vispeek庐聽series |
Tg聽(潞C) |
Tm聽(潞C) |
HDT聽(潞C) |
9-PEEK |
143 |
343 |
>330 |
HT9-PEEKK* |
161 |
367 |
>330 |
ST9-PEDEKK* |
183 |
409 |
>330 |
*In development
鈥 Outstanding friction and wear resistance
鈥 Excellent chemical resistance
鈥 Excellent resistance to hydrolysis
鈥 Good intrinsic flame retardancy
鈥 Little smoke and toxic gas release during combustion
鈥 Low water absorption, resulting in high dimensional stability
鈥 Good electrical performance
鈥 Good processability
Automobile
路 聽 Machinery and equippment
路 聽 Electronics and semiconductors
路 聽 Cable
路 聽 Coating
Grades |
Description |
Vispeek庐聽9001AP |
Low viscosity, 聽 unreinforced, fine powder, UL94 V-0 at 0.75~3.0 mm, for powder coating |
Vispeek庐聽9002P |
High viscosity, 聽 unreinforced, powder, UL94 V-0 at 0.75~3.0 mm, for extrusion and compression 聽 molding |
Vispeek庐聽9003P |
Standard 聽 viscosity, unreinforced, powder, UL94 V-0 at 0.75~3.0 mm, for extrusion and 聽 compression molding |
Vispeek庐聽9002G |
Medium 聽 viscosity, unreinforced, granule, UL94 V-0 at 0.75~3.0 mm, for extrusion and 聽 injection molding |
Vispeek庐聽9003G |
Standard viscosity, unreinforced, granule, UL94 V-0 at 聽 0.75~3.0 mm, for extrusion and injection molding |
Vispeek庐聽GR9103 |
10% GF reinforced, UL94 V-0 at 0.5~3.0mm, for injection 聽 molding |
Vispeek庐聽GR9303 |
30% GF reinforced, UL94 V-0 at 0.5~3.0mm, for injection 聽 molding |
Vispeek庐聽CF9202 |
20% CF reinforced, UL94 V-0 at 0.5~3.0mm, for injection 聽 molding |
Vispeek庐聽CF9303 |
30% CF reinforced, UL94 V-0 at 0.5~3.0mm, for injection 聽 molding |
Vispeek庐聽FG9303 |
10% CF and 10% graphite co-reinforced, plus 10% PTFE |
Vispeek庐聽9003E3 |
Antistatic, for extrusion and injection molding |
